Now Location:Home > News > Product Knowledge

Product Knowledge

How to Easily Install Acoustic Panels?

Author:Leeyin Acoustics  Date:2017-05-08  From:  Hits:50

timg (4)

The most important thing to choose the noise board is to see whether it has a test report. After installing the sound insulation board, you need to correctly install. If the installation for sound insulation board is not correct, the sound insulation effect will be greatly reduced. So how do you install the noise board? Is the operation difficult or not? Let you tell you the correct way to sound board in the following article.

Install the sound insulation board

In order to achieve a good sound insulation, the installation of noise board must be very simple, otherwise it is difficult to achieve the desired sound insulation effect. Professional acoustics engineers are clear that if a wall is detected soundproof X decibels in the laboratory, it often can only sound insulation X-2 decibels in actual engineering, the sound insulation is even lower. There are two main reasons for the wall insulation value of the actual project lower than the laboratory test value: the problem of lateral transmission in practical engineering, and the actual installation quality of the wall bad than laboratory professional.

Tools / raw materials:

Hanging pole, side keel, cover keel, load keel, crossed keel, wall keel, acoustic panels, soundproof sealant

 

Method / Step:

1.Preparation before installation

After installation of hanging pole, side keel, cover keel, load keel, crossed keel, wall keel are completed, of course, to ensure the installation quality of the keel. Also need to ensure that the keel is dry and cleanliness. When finished, remove extra screws and other excess objects.

2.Measure the size of the space, cut the sound insulation board according to the size of the room and structure as needed, the aim is to reduce the inter-board seams. You can use the knife engraving and sawing method. For multiple layers of sound insulation board, because it is required to engrave deep, so the use of sawing is better. After cutting is complete,  be sure to do the trimming for the cutting edge and end, to make it smooth.

3.The longer side of the sound insulation board should be vertically with the vice keel, the shorter side needs to be staggered installation. After the installation, fill the gap with a sealant, and appropriately extrude, to ensure that the gap between the board and the wall is tight. Pay attention to fix after sealing, the horn head rough screw is generally used for wood keel and the trumpet head thread screw is usually used for the metal keel.

4.The longer side of the sound insulation board should be vertically with the vice keel, the shorter side needs to be staggered installation. After the installation, fill the gap with a sealant, and appropriately extrude, to ensure that the gap between the board and the wall is tight. Pay attention to fix after sealing, the horn head rough screw is generally used for wood keel and the trumpet head thread screw is usually used for the metal keel.

Precautions:

Use qualified keel, it is recommended to use a 60CM light steel keel for the combination and installation of sound insulation board, the voids need to be treated with a sound sealant.


ABOUT US

Leeyin Acoustics offer designers a variety of options, sound insulation, sound absorption, and diffusion products which are suitable for use in different environmental areas. 

LEEYIN, QPLAN and Happy Family three series of products can meet the different needs of public building space acoustics, environmental noise reduction vibration treatment and home building acoustics.

Request A Free CatalogYour Name(Required)
Your E-mail(Required)
Your Content(Required)
Submit

© 2017 LEEYIN Acoustics All rights reserved