QPLAN Sound Insulation Series

QPLAN Sound Insulation Ceiling Hanger
  • Product Parameter
  • Technical chart
  • Application example
  • The QPLAN soundproof ceilings system can effectively improve the noise transmission problem of floor structure, at the same time to improve the floating platform STC sound insulation level. The soundproof ceilings system used in conjunction with the floating floor can maximum improve the floor STC sound level. The minimum installation space of sound insulation ceiling is less than 80mm, which effectively saves space. Sound insulation ceiling system can hang a variety of finishes according to the designer requirement, and to set the corresponding system to match according to the size of the load, which doesn't need to make the choice of decorative options because of the increase in acoustic requirements. It has a friendly cooperation relation in the industry with many architects, interior designers, contractors and owners.


    The damping principle of QPLAN ceiling vibration isolation clip is using flexible connection to fix the soundproof ceilings, fans, ducts and other power equipment  in the original building structure ceiling. QPLAN Ceiling vibration isolation clip is designed to cushion vibration damping clip, the hook load bearing adopts low natural frequency rubber cushion block, there is no rigid connection between the fixed end of the structure and the fixed end of the system, effectively put an end to the sound bridge, and will not make the noise pass through the rigid connection directly to the building structure.


    The deformation curve of the rubber cushion block is designed as a linear characteristic. Under the same amount of deformation, the natural frequency of the limit clip is roughly the same as the rubber dam in the load direction, this design can provide greater load capacity and better security. Rubber cushion not only has stable mechanical properties, but also has the characteristics of low frequency and high damping, which can effectively eliminate the vibration caused by the phenomenon of amplitude surge. It has very clear vibration isolation effect in a wide range of interference rate, particularly suitable for the sensitive areas which have very strict sound insulation requirements.


    Product Features:

    1.Stable mechanical properties

    2. Excellent damping performance

    3. rustproof, durable, green and environmental protection

    4. Effectively reduce air and structural impact noise

    5. Save installation space, convenient construction

    6. Self-locking design, avoid secondary noise between keel and the hanger


    Scope of application: QPLAN ceiling vibration isolation hanger is mainly used for construction industry, home bedroom, plant, engine room, conference room, multi-function hall, KTV room, office and other places need for noise reduction, which is often used together with QPLAN sound insulation wall system and ground vibration isolation system to build room-in-room structure.

    • 13.jpg

        ABOUT US

        Leeyin Acoustics offer designers a variety of options, sound insulation, sound absorption, and diffusion products which are suitable for use in different environmental areas. 

        LEEYIN, QPLAN and Happy Family three series of products can meet the different needs of public building space acoustics, environmental noise reduction vibration treatment and home building acoustics.

        Request A Free CatalogYour Name(Required)
        Your E-mail(Required)
        Your Content(Required)

        © 2017 LEEYIN Acoustics All rights reserved